This time, it's a Sony Vaio VPCEB4L1EWI, with i3-380M CPU. About two
years old. Running Prime95 stress test, the cores were reaching 85 deg C
and the fan was rather noisy.
1. Strip off the back plate, undoing all the visible screws, taking
careful note of where they all go back - there are several different sizes and
types. The back plate then snaps off - be careful with the small white
lugs on the upper side here. One came off despite me taking care.
Always wear an anti-static wrist strap, connected to a metal part of the
laptop (e.g. the USB connector) when working.
2. Here is the heatsink / heat pipe / fan assembly removed. The
grey heatsink paste had set quite hard.
3. Clean up the CPU top surface carefully with meths, a cloth, and
cotton buds.
4. Clean all the old paste off the heatsink.
5. To do a really good job, "flat" the heatsink down with a
diamond file, cleaning the copper dust off regularly. I kept applying a
few drops of meths as a non-greasy lubricant while working.
After a few minutes you should be able to get a near mirror-finish on the
heatsink. Don't over do it - copper is a very soft material.
7. Apply a new heatsink paste (I used Arctic MX-4), and re-assemble
the machine.
Measuring the core temperature with "CPUtemp" and running
"Prime95" stress test, the peak core temp reached 68 deg C instead of
85, and the fan ran much quieter as a result.
No comments:
Post a Comment